MODEL: Accu-Lift Transporter - Series One - 10 Ton
CAPACITY: 10 Ton / 20,000 LBS G.V.W.R / For power boats up to 34' in length
DIMENSIONS: Overall Length Standard - 37'6" (24' S.R.)
Optional - + length of extension
  Overall Width Standard - 108"
  Inside Clear Width Standard - 42-1/4"
  Trailer Weight Base / Plain 4500 lbs.


  • Structural grade 6 X 6 X 3/8 ASTM A500 steel tubing construction - main frame

  • All welding of steel structures are performed only by fitter-welders who are certified through the American Welding Society utilizing the most modern up to date equipment available in the industry

  • Open center design utilizes a swing out rear support beam with a mechanical ratcheting system for complete adjustability and accurate stabilization of mainframe side rails.

  • Hydraulically operated articulated pintle ring draw bar with safety chains

  • Front tongue area offers over 11 sq. ft of storage, for blocking, tie down equipment, misc.

  • All connecting pins, washers and cotter pins are of high-grade commercial stainless steel.


  • Heavy Duty Dexter 5.2K straight axle assemblies

  • Electric brakes 4 total on 2 axles

  • Under-slung slipper spring suspension system 8 total @ 3000# each

  • 5 Bolt hub & drums with cooling fins

  • E-Z Lube bearing protection system guards against water entry and corrosion assuring long life and minimal maintenance.

  • 6 Bolt plain steel wheels with ST-225-75R-15 - D / 2540 65 P.S.I. each. Trailer tire assemblies.


  • Two rear independently operated hydraulic boat stern support arms 42” long feature a 6” reversible offset with large adjustable bolster pads that have additional 2 1/2” of lateral movement providing many forms of adjustment to accommodate small to large boats

  • Adjustable rear keel center support stanchion

  • Removable trailer length adjustable (five position) bow-keel support beam with large self-adjusting wood support pads.

  • Four adjustable screw jack assemblies with swivel top support pads which can utilize ten different positions.

  • All support and bolster pads are pressure treated lumber covered with marine grade carpet fastened with stainless steel staples.

  • One – bow eye tie down D-ring

  • Two – swivel tie down D-rings – rear

  • Two – tie down cleats – rear

  • Two – tie down cleats – front


  • Industrial grade high quality hydraulic components thru-out

  • 12-volt dc battery powered self-contained hydraulic pump with manual lever arm: controlled solenoid valves

  • Every function is independently controlled

  • Front hydraulic cylinder for fore and aft leveling

  • Hydraulic unit and battery are mounted on a forward facing pedestal above the frame

  • For safety during loading and unloading the front pivoting cylinder contains an adjustable control valve for complete control of all loads

  • All load carrying hydraulic cylinders are equipped with pilot operated double locking valves

  • 3/8 diameter abrasion resistant hydraulic hose assemblies feature marine grade construction important when resistance to hydrolysis from seawater is required

  • Hydraulic hoses are inside the tubular frame for protection


  • D.O.T approved rubber mounted totally submersible lighting

  • Two - combination stop, turn, taillights rear

  • Two - red side marker clearance lights

  • Two - amber side marker clearance lights

  • License plate light

  • Complete break-a-way system with a nylon switch with galvanized rope halyard

  • Rechargeable sealed maintenance – free battery with charger. In a lockable Polyethylene plastic battery case

  • All wires are inside of frame or fitted with plastic loom for protection

  • All wiring connections terminate in a weatherproof junction box mounted underneath the control pedestal mount

  • Vehicle recharge circuit maintains both main and breakaway batteries

FINISH: Frame and all components sandblasted white metal. Base coat two coats high build epoxy primer. Top coat three coats high performance acrylic urethane with hardener - choice of color
PRICE: F.O.B. Akron, Ohio / $17,250.00 - Base
TAXES: Applicable state taxes are not included. They are the buyer's responsibility.
TERMS: Cash - Certified Funds, Electronic Transfer
SPECIAL ORDER: One third at signing of contract
One third midpoint of construction
Balance - upon completion

Click here for Optional Upgrades